program FieldConcurrentComponent
#include "ESMF_Conf.inc"
#include "ESMF.h"
#define ESMF_METHOD "FieldConcurrentComponent"
! ESMF Framework module
use ESMF
use ESMF_TestMod
use user_model1, only : userm1_setvm, userm1_register
use user_model2, only : userm2_setvm, userm2_register
use user_coupler, only : usercpl_setvm, usercpl_register
implicit none
! Local variables
integer :: pet_id, npets, rc, userrc, localrc
character(len=ESMF_MAXSTR) :: cname1, cname2, cplname
type(ESMF_VM):: vm
type(ESMF_State) :: c1exp, c2imp
type(ESMF_GridComp) :: comp1, comp2
type(ESMF_CplComp) :: cpl
! instantiate a clock, a calendar, and timesteps
type(ESMF_Clock) :: clock
type(ESMF_Calendar) :: gregorianCalendar
type(ESMF_TimeInterval) :: timeStep
type(ESMF_Time) :: startTime
type(ESMF_Time) :: stopTime
! cumulative result: count failures; no failures equals "all pass"
integer :: testresult = 0
integer :: result = 0
! individual test name
character(ESMF_MAXSTR) :: testname
! individual test failure message, and final status msg
character(ESMF_MAXSTR) :: failMsg, finalMsg
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
print *, "Start of System Test ConcurrentComponent."
localrc = ESMF_SUCCESS
rc = ESMF_SUCCESS
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Create section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
!
! Initialize framework and get back default global VM
call ESMF_Initialize(vm=vm, defaultlogfilename="FieldConCompSTest.Log", &
logkindflag=ESMF_LOGKIND_MULTI, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_LogSet (flush=.true.)
! Get number of PETs we are running with
call ESMF_VMGet(vm, petCount=npets, localPET=pet_id, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! Check for correct number of PETs
if (npets .lt. 8) then
call ESMF_LogSetError(ESMF_RC_ARG_BAD, &
msg="This system test needs to run at least 8-way", &
ESMF_CONTEXT, rcToReturn=rc)
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
endif
! Create the 2 model components and coupler
cname1 = "user model 1"
comp1 = ESMF_GridCompCreate(name=cname1, petList=(/ 6,2,4,0 /), rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Created component ", trim(cname1), "rc =", rc
cname2 = "user model 2"
comp2 = ESMF_GridCompCreate(name=cname2, petList=(/ 5,1,3 /), rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Created component ", trim(cname2), "rc =", rc
cplname = "user one-way coupler"
cpl = ESMF_CplCompCreate(name=cplname, petList=(/ 0,1,2,3,4,5,6 /), rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Created component ", trim(cplname), ", rc =", rc
!print *, "Comp Creates finished"
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Register section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
call ESMF_GridCompSetVM(comp1, userRoutine=userm1_setvm, &
userRc=userrc, rc=localrc)
print *, "Comp1 SetVM finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompSetServices(comp1, userRoutine=userm1_register, &
userRc=userrc, rc=localrc)
print *, "Comp1 SetServices finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompSetVM(comp2, userRoutine=userm2_setvm, &
userRc=userrc, rc=localrc)
print *, "Comp2 SetVM finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompSetServices(comp2, userRoutine=userm2_register, &
userRc=userrc, rc=localrc)
print *, "Comp2 SetServices finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_CplCompSetVM(cpl, userRoutine=usercpl_setvm, &
userRc=userrc, rc=localrc)
print *, "Cpl SetVM finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_CplCompSetServices(cpl, userRoutine=usercpl_register, &
userRc=userrc, rc=localrc)
print *, "Cpl SetServices finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Create and initialize a clock.
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! initialize calendar to be Gregorian type
gregorianCalendar = ESMF_CalendarCreate(ESMF_CALKIND_GREGORIAN, &
name="Gregorian", rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! initialize time interval to 4 hours
call ESMF_TimeIntervalSet(timeStep, h=4, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! initialize start time to 5/01/2003
call ESMF_TimeSet(startTime, yy=2003, mm=5, dd=1, &
calendar=gregorianCalendar, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! initialize stop time to 5/02/2003
call ESMF_TimeSet(stopTime, yy=2003, mm=5, dd=2, &
calendar=gregorianCalendar, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! initialize the clock with the above values
clock = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, &
name="Clock 1", rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Init section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
c1exp = ESMF_StateCreate(name="comp1 export", &
stateintent=ESMF_STATEINTENT_EXPORT, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_GridCompInitialize(comp1, exportState=c1exp, clock=clock, &
userRc=userrc, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Comp 1 Initialize finished, rc =", rc
c2imp = ESMF_StateCreate(name="comp2 import", &
stateintent=ESMF_STATEINTENT_IMPORT, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_GridCompInitialize(comp2, importState=c2imp, clock=clock, &
userRc=userrc, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Comp 2 Initialize finished, rc =", rc
! note that the coupler's import is comp1's export
call ESMF_CplCompInitialize(cpl, importState=c1exp, &
exportState=c2imp, clock=clock, userRc=userrc, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Coupler Initialize finished, rc =", rc
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Run section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
do while (.not. ESMF_ClockIsStopTime(clock, rc=localrc))
!print *, "PET ", pet_id, " starting time step..."
! Uncomment the following call to ESMF_GridCompWait() to sequentialize
! comp1 and comp2. The following ESMF_GridCompWait() call will block
! all PETs until comp2 has returned. Consequently comp1 will not be
! run until comp2 has returned.
!call ESMF_GridCompWait(comp2, syncflag=ESMF_SYNC_BLOCKING, rc=localrc)
!print *, "Comp 2 Wait returned, rc =", localrc
!if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
! ESMF_CONTEXT, rcToReturn=rc)) &
! call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! Run the first component:
! After the first time thru the loop this will be running concurrently
! with the second component since comp1 and comp2 are defined on
! exclusive sets of PETs
!print *, "I am calling into GridCompRun(comp1)"
call ESMF_GridCompRun(comp1, exportState=c1exp, clock=clock, &
userRc=userrc, rc=localrc)
!print *, "Comp 1 Run returned, rc =", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
! Uncomment the following calls to ESMF_GridCompWait() to sequentialize
! comp1, comp2 and the coupler. The following ESMF_GridCompWait() calls
! will block all PETs until comp1 and comp2 have returned. Consequently
! the coupler component will not be run until comp1 and comp2 have
! returned.
!call ESMF_GridCompWait(comp1, syncflag=ESMF_SYNC_BLOCKING, rc=localrc)
!print *, "Comp 1 Wait returned, rc =", localrc
!if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
! ESMF_CONTEXT, rcToReturn=rc)) &
! call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!call ESMF_GridCompWait(comp2, syncflag=ESMF_SYNC_BLOCKING, rc=localrc)
!print *, "Comp 2 Wait returned, rc =", localrc
!if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
! ESMF_CONTEXT, rcToReturn=rc)) &
! call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! Run the coupler:
! The coupler will run in "per-PET sequential" mode because it runs on
! the union of all PETs. Depending on the per-PET runtime of comp1 and
! comp2 some PETs may start/finish executing the coupler at different
! times. There is no intrinsic inter PET synchronization in calling
! component methods via CompI/R/F(). However, collective communication
! calls contained in the user written coupler methods will indirectly
! lead to inter PET synchronization of the coupler component.
!print *, "I am calling into CplCompRun(cpl)"
call ESMF_CplCompRun(cpl, importState=c1exp, exportState=c2imp, &
clock=clock, userRc=userrc, rc=localrc)
!print *, "Coupler Run returned, rc =", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
! Uncomment the following call to ESMF_GridCompWait() to sequentialize
! comp1 and comp2. The following ESMF_GridCompWait() call will block
! all PETs until comp1 has returned. Consequently comp2 will not be
! run until comp2 has returned.
!call ESMF_GridCompWait(comp1, syncflag=ESMF_SYNC_BLOCKING, rc=localrc)
!print *, "Comp 1 Wait returned, rc =", localrc
!if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
! ESMF_CONTEXT, rcToReturn=rc)) &
! call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
! Run the second component:
! Since comp1 and comp2 are defined on exclusive sets of PETs those PET
! that are part of comp1 will not block in the following call but proceed
! to the next loop increment, executing comp1 concurrently with comp2.
!print *, "I am calling into GridCompRun(comp2)"
call ESMF_GridCompRun(comp2, importState=c2imp, clock=clock, &
userRc=userrc, rc=localrc)
!print *, "Comp 2 Run returned, rc =", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_ClockAdvance(clock, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!call ESMF_ClockPrint(clock, rc=localrc)
!print *, "... time step finished on PET ", pet_id, "."
enddo
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Finalize section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Print result
call ESMF_GridCompFinalize(comp1, exportState=c1exp, clock=clock, &
userRc=userrc, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Comp 1 Finalize finished, rc =", rc
call ESMF_GridCompFinalize(comp2, importState=c2imp, clock=clock, &
userRc=userrc, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Comp 2 Finalize finished, rc =", rc
call ESMF_CplCompFinalize(cpl, importState=c1exp, &
exportState=c2imp, clock=clock, userRc=userrc, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "Coupler Finalize finished, rc =", rc
!print *, "Comp Finalize returned"
!
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Destroy section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Clean up
call ESMF_StateDestroy(c1exp, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_StateDestroy(c2imp, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_ClockDestroy(clock, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_CalendarDestroy(gregorianCalendar, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_GridCompDestroy(comp1, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_GridCompDestroy(comp2, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
call ESMF_CplCompDestroy(cpl, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
!print *, "All Destroy routines done"
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
print *, "System Test ConcurrentComponent complete."
rc = localrc
! Normal ESMF Test output
write(failMsg, *) "System Test failure"
write(testname, *) "System Test ConcurrentComponent: Field Concurrent Components"
! Separate message to console, for quick confirmation of success/failure
if (rc .eq. ESMF_SUCCESS) then
write(finalMsg, *) "SUCCESS: Concurrent Component test finished correctly."
else
write(finalMsg, *) "System Test did not succeed. Error code ", rc
endif
write(0, *) ""
write(0, *) trim(testname)
write(0, *) trim(finalMsg)
write(0, *) ""
! IMPORTANT: ESMF_STest() prints the PASS string and the # of processors
! into the Log file that the scripts grep for.
call ESMF_STest((rc.eq.ESMF_SUCCESS), testname, failMsg, result, &
__FILE__, &
__LINE__)
call ESMF_Finalize(rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
end program FieldConcurrentComponent