program ESMF_FieldBundleRedistPackedSTest
#define ESMF_METHOD "program ESMF_FieldBundleRedistPackedSTest"
#include "ESMF.h"
! ESMF Framework module
use ESMF
use ESMF_TestMod
use user_model1, only : userm1_setvm, userm1_register
use user_model2, only : userm2_setvm, userm2_register
use user_coupler, only : usercpl_setvm, usercpl_register
implicit none
! Local variables
integer :: localPet, petCount, userrc, urc, localrc, rc=ESMF_SUCCESS
character(len=ESMF_MAXSTR) :: cname1, cname2, cplname
type(ESMF_VM):: vm
type(ESMF_State) :: c1exp, c2imp
type(ESMF_GridComp) :: comp1, comp2
type(ESMF_CplComp) :: cpl
! cumulative result: count failures; no failures equals "all pass"
integer :: result = 0
! individual test name
character(ESMF_MAXSTR) :: testname
! individual test failure message, and final status msg
character(ESMF_MAXSTR) :: failMsg, finalMsg
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
write(failMsg, *) "System Test failure"
write(testname, *) "System Test ESMF_FieldBundleRedistPacked"
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
print *, "--------------------------------------- "
print *, "Start of ", trim(testname)
print *, "--------------------------------------- "
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Create section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
!
! Initialize framework and get back default global VM
call ESMF_Initialize(vm=vm, defaultlogfilename="FieldBundleRedistPackedSTest.Log", &
logkindflag=ESMF_LOGKIND_MULTI, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_LogSet (flush=.true.)
! Get number of PETs we are running with
call ESMF_VMGet(vm, petCount=petCount, localPet=localPet, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
! Check for correct number of PETs
if ( petCount < 6 ) then
call ESMF_LogSetError(ESMF_RC_ARG_BAD,&
msg="This system test does not run on fewer than 6 PETs.",&
ESMF_CONTEXT, rcToReturn=rc)
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
endif
! Create the 2 model components and coupler
cname1 = "user model 1"
! use petList to define comp1 on PET 0,1,2,3
comp1 = ESMF_GridCompCreate(name=cname1, petList=(/0,1,2,3/), rc=localrc)
print *, "Created component ", trim(cname1), "rc =", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
cname2 = "user model 2"
! use petList to define comp2 on PET 4,5
comp2 = ESMF_GridCompCreate(name=cname2, petList=(/4,5/), rc=localrc)
print *, "Created component ", trim(cname2), "rc =", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
cplname = "user one-way coupler"
! no petList means that coupler component runs on all PETs
cpl = ESMF_CplCompCreate(name=cplname, rc=localrc)
print *, "Created component ", trim(cplname), ", rc =", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
print *, "Comp Creates finished"
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Register section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
call ESMF_GridCompSetVM(comp1, userRoutine=userm1_setvm, &
userRc=userrc, rc=localrc)
print *, "Comp1 SetVM finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompSetServices(comp1, userRoutine=userm1_register, &
userRc=userrc, rc=localrc)
print *, "Comp1 SetServices finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompSetVM(comp2, userRoutine=userm2_setvm, &
userRc=userrc, rc=localrc)
print *, "Comp2 SetVM finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompSetServices(comp2, userRoutine=userm2_register, &
userRc=userrc, rc=localrc)
print *, "Comp2 SetServices finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_CplCompSetVM(cpl, userRoutine=usercpl_setvm, &
userRc=userrc, rc=localrc)
print *, "Cpl SetVM finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_CplCompSetServices(cpl, userRoutine=usercpl_register, &
userRc=userrc, rc=localrc)
print *, "Cpl SetServices finished, rc= ", localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(userrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Init section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
c1exp = ESMF_StateCreate(name="comp1 export", &
stateintent=ESMF_STATEINTENT_EXPORT, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompInitialize(comp1, exportState=c1exp, userRc=urc, rc=localrc)
print *, "Comp 1 Initialize finished, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
c2imp = ESMF_StateCreate(name="comp2 import", &
stateintent=ESMF_STATEINTENT_IMPORT, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompInitialize(comp2, importState=c2imp, userRc=urc, rc=localrc)
print *, "Comp 2 Initialize finished, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
#if 1
! note that the coupler's import is comp1's export state
! and coupler's export is comp2's import state
call ESMF_CplCompInitialize(cpl, importState=c1exp, &
exportState=c2imp, userRc=urc, rc=localrc)
print *, "Coupler Initialize finished, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Run section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
call ESMF_GridCompRun(comp1, exportState=c1exp, userRc=urc, rc=localrc)
print *, "Comp 1 Run returned, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_CplCompRun(cpl, importState=c1exp, &
exportState=c2imp, userRc=urc, rc=localrc)
print *, "Coupler Run returned, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompRun(comp2, importState=c2imp, userRc=urc, rc=localrc)
print *, "Comp 2 Run returned, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Finalize section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
call ESMF_CplCompFinalize(cpl, importState=c1exp, &
exportState=c2imp, userRc=urc, rc=localrc)
print *, "Coupler Finalize finished, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompFinalize(comp1, exportState=c1exp, userRc=urc, rc=localrc)
print *, "Comp 1 Finalize finished, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompFinalize(comp2, importState=c2imp, userRc=urc, rc=localrc)
print *, "Comp 2 Finalize finished, rc =", urc, localrc
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
if (ESMF_LogFoundError(urc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
! Destroy section
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
call ESMF_GridCompDestroy(comp1, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_GridCompDestroy(comp2, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_CplCompDestroy(cpl, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_StateDestroy(c1exp, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
call ESMF_StateDestroy(c2imp, rc=localrc)
if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
ESMF_CONTEXT, rcToReturn=rc)) &
call ESMF_Finalize(rc=rc, endflag=ESMF_END_ABORT)
print *, "All Destroy routines done"
#endif
!-------------------------------------------------------------------------
!-------------------------------------------------------------------------
10 continue
! Normal ESMF Test output
print *, testname, " complete."
if (rc .eq. ESMF_SUCCESS) then
! Separate message to console, for quick confirmation of success/failure
write(finalMsg, *) "SUCCESS: ",trim(testname)," finished correctly."
write(0, *) ""
write(0, *) trim(testname)
write(0, *) trim(finalMsg)
write(0, *) ""
endif
print *, "------------------------------------------------------------"
print *, "------------------------------------------------------------"
print *, "Test finished, localPet = ", localPet
print *, "------------------------------------------------------------"
print *, "------------------------------------------------------------"
! IMPORTANT: ESMF_STest() prints the PASS string and the # of processors in the log
! file that the scripts grep for.
call ESMF_STest((rc.eq.ESMF_SUCCESS), testname, failMsg, result, ESMF_SRCLINE)
call ESMF_Finalize()
end program ESMF_FieldBundleRedistPackedSTest