subroutine check_mesh_from_sph_3D_EM_file(correct, rc)
type(ESMF_Mesh) :: mesh
logical :: correct
integer :: rc
integer, pointer :: nodeIds(:),nodeOwners(:),nodeMask(:)
real(ESMF_KIND_R8), pointer :: nodeCoords(:)
real(ESMF_KIND_R8), pointer :: ownedNodeCoords(:)
integer :: numNodes, numOwnedNodes, numOwnedNodesTst
integer :: numElems,numOwnedElemsTst
integer :: numElemConns, numTriElems, numQuadElems
real(ESMF_KIND_R8), pointer :: elemCoords(:)
integer, pointer :: elemIds(:),elemTypes(:),elemConn(:)
integer, allocatable :: elemMask(:)
real(ESMF_KIND_R8),allocatable :: elemArea(:)
integer :: petCount, localPet
type(ESMF_VM) :: vm
type(ESMF_DistGrid) :: elemDistgrid
type(ESMF_Field) :: nodeField, elemField
integer :: i,j,k
integer :: numNodesTst, numElemsTst,numElemConnsTst
integer,allocatable :: elemIdsTst(:)
integer,allocatable :: elemTypesTst(:)
integer,allocatable :: elemConnTst(:)
real(ESMF_KIND_R8),allocatable :: elemAreaTst(:)
integer,allocatable :: nodeIdsTst(:)
real(ESMF_KIND_R8),allocatable :: nodeCoordsTst(:)
integer,allocatable :: nodeOwnersTst(:)
integer,allocatable :: nodeMaskTst(:)
integer,allocatable :: elemMaskTst(:)
real(ESMF_KIND_R8), allocatable :: elemCoordsTst(:)
logical :: nodeMaskIsPresentTst
logical :: elemMaskIsPresentTst
logical :: elemAreaIsPresentTst
logical :: elemCoordsIsPresentTst
integer :: pdim, sdim
type(ESMF_CoordSys_Flag) :: coordSys
! get global VM
call ESMF_VMGetGlobal(vm, rc=rc)
if (rc /= ESMF_SUCCESS) return
call ESMF_VMGet(vm, localPet=localPet, petCount=petCount, rc=rc)
if (rc /= ESMF_SUCCESS) return
! return with an error if not 1 or 4 PETs
if ((petCount /= 1) .and. (petCount /=4)) then
rc=ESMF_FAILURE
return
endif
! XMRKX !
! Create Dest Mesh
if (petCount .eq. 1) then
! Set number of nodes
numNodes=18
! Allocate and fill the node id array.
allocate(nodeIds(numNodes))
nodeIds=(/1,2,3,4,5,6,7,8,9, &
10,11,12,13,14,15,16,17,18/)
! Allocate and fill node coordinate array.
! Since this is a 3D Mesh the size is 3x the
! number of nodes.
allocate(nodeCoords(3*numNodes))
nodeCoords=(/0.0,0.0,1.0, & ! node id 1
1.0,0.0,1.0, & ! node id 2
2.0,0.0,1.0, & ! node id 3
0.0,1.0,1.0, & ! node id 4
1.0,1.0,1.0, & ! node id 5
2.0,1.0,1.0, & ! node id 6
0.0,2.0,1.0, & ! node id 7
1.0,2.0,1.0, & ! node id 8
2.0,2.0,1.0, & ! node id 9
0.0,0.0,2.0, & ! node id 10
1.0,0.0,2.0, & ! node id 11
2.0,0.0,2.0, & ! node id 12
0.0,1.0,2.0, & ! node id 13
1.0,1.0,2.0, & ! node id 14
2.0,1.0,2.0, & ! node id 15
0.0,2.0,2.0, & ! node id 16
1.0,2.0,2.0, & ! node id 17
2.0,2.0,2.0 /) ! node id 18
! Allocate and fill the node owner array.
! Since this Mesh is all on PET 0, it's just set to all 0.
allocate(nodeOwners(numNodes))
nodeOwners=0 ! everything on PET 0
! Set the number of each type of element, plus the total number.
numElems=4
! Allocate and fill the element id array.
allocate(elemIds(numElems))
elemIds=(/1,2,3,4/)
! Allocate and fill the element topology type array.
allocate(elemTypes(numElems))
elemTypes=ESMF_MESHELEMTYPE_HEX
! Allocate and fill the element connection type array.
! Note that entries in this array refer to the
! positions in the nodeIds, etc. arrays and that
! the order and number of entries for each element
! reflects that given in the Mesh options
! section for the corresponding entry
! in the elemTypes array.
allocate(elemConn(8*numElems))
elemConn=(/1,2,5,4,10,11,14,13, & ! elem id 1
2,3,6,5,11,12,15,14, & ! elem id 2
4,5,8,7,13,14,17,16, & ! elem id 3
5,6,9,8,14,15,18,17/) ! elem id 4
else if (petCount .eq. 4) then
! Setup mesh data depending on PET
if (localPET .eq. 0) then !!! This part only for PET 0
! Set number of nodes
numNodes=8
! Allocate and fill the node id array.
allocate(nodeIds(numNodes))
nodeIds=(/1,2,4,5,10,11,13,14/)
! Allocate and fill node coordinate array.
! Since this is a 2D Mesh the size is 2x the
! number of nodes.
allocate(nodeCoords(3*numNodes))
nodeCoords=(/0.0,0.0,1.0, & ! node id 1
1.0,0.0,1.0, & ! node id 2
0.0,1.0,1.0, & ! node id 4
1.0,1.0,1.0, & ! node id 5
0.0,0.0,2.0, & ! node id 10
1.0,0.0,2.0, & ! node id 11
0.0,1.0,2.0, & ! node id 13
1.0,1.0,2.0 /) ! node id 14
! Allocate and fill the node owner array.
allocate(nodeOwners(numNodes))
nodeOwners=(/0, & ! node id 1
0, & ! node id 2
0, & ! node id 4
0, & ! node id 5
0, & ! node id 10
0, & ! node id 11
0, & ! node id 13
0/) ! node id 14
! Set the number of each type of element, plus the total number.
numElems=1
! Allocate and fill the element id array.
allocate(elemIds(numElems))
elemIds=(/1/)
! Allocate and fill the element topology type array.
allocate(elemTypes(numElems))
elemTypes=(/ESMF_MESHELEMTYPE_HEX/) ! elem id 1
! Allocate and fill the element connection type array.
! Note that entry are local indices
allocate(elemConn(8*numElems))
elemConn=(/1,2,4,3,5,6,8,7/) ! elem id 1
else if (localPET .eq. 1) then !!! This part only for PET 1
! Set number of nodes
numNodes=8
! Allocate and fill the node id array.
allocate(nodeIds(numNodes))
nodeIds=(/2,3,5,6,11,12,14,15/)
! Allocate and fill node coordinate array.
! Since this is a 3D Mesh the size is 2x the
! number of nodes.
allocate(nodeCoords(3*numNodes))
nodeCoords=(/1.0,0.0,1.0, & ! node id 2
2.0,0.0,1.0, & ! node id 3
1.0,1.0,1.0, & ! node id 5
2.0,1.0,1.0, & ! node id 6
1.0,0.0,2.0, & ! node id 11
2.0,0.0,2.0, & ! node id 12
1.0,1.0,2.0, & ! node id 14
2.0,1.0,2.0/) ! node id 15
! Allocate and fill the node owner array.
allocate(nodeOwners(numNodes))
nodeOwners=(/0, & ! node id 2
1, & ! node id 3
0, & ! node id 5
1, & ! node id 6
0, & ! node id 11
1, & ! node id 12
0, & ! node id 14
1/) ! node id 15
! Set the number of each type of element, plus the total number.
numElems=1
! Allocate and fill the element id array.
allocate(elemIds(numElems))
elemIds=(/2/)
! Allocate and fill the element topology type array.
allocate(elemTypes(numElems))
elemTypes=(/ESMF_MESHELEMTYPE_HEX/) ! elem id 1
! Allocate and fill the element connection type array.
! Note that entry are local indices
allocate(elemConn(8*numElems))
elemConn=(/1,2,4,3,5,6,8,7/) ! elem id 1
else if (localPET .eq. 2) then !!! This part only for PET 2
! Set number of nodes
numNodes=8
! Allocate and fill the node id array.
allocate(nodeIds(numNodes))
nodeIds=(/4,5,7,8,13,14,16,17/)
! Allocate and fill node coordinate array.
! Since this is a 3D Mesh the size is 2x the
! number of nodes.
allocate(nodeCoords(3*numNodes))
nodeCoords=(/0.0,1.0,1.0, & ! node id 4
1.0,1.0,1.0, & ! node id 5
0.0,2.0,1.0, & ! node id 7
1.0,2.0,1.0, & ! node id 8
0.0,1.0,2.0, & ! node id 13
1.0,1.0,2.0, & ! node id 14
0.0,2.0,2.0, & ! node id 16
1.0,2.0,2.0/) ! node id 17
! Allocate and fill the node owner array.
! Since this Mesh is all on PET 0, it's just set to all 0.
allocate(nodeOwners(numNodes))
nodeOwners=(/0, & ! node id 4
0, & ! node id 5
2, & ! node id 7
2, & ! node id 8
0, & ! node id 13
0, & ! node id 14
2, & ! node id 16
2/) ! node id 17
! Set the number of each type of element, plus the total number.
numElems=1
! Allocate and fill the element id array.
allocate(elemIds(numElems))
elemIds=(/3/)
! Allocate and fill the element topology type array.
allocate(elemTypes(numElems))
elemTypes=(/ESMF_MESHELEMTYPE_HEX/) ! elem id 1
! Allocate and fill the element connection type array.
! Note that entry are local indices
allocate(elemConn(8*numElems))
elemConn=(/1,2,4,3,5,6,8,7/) ! elem id 1
else if (localPET .eq. 3) then !!! This part only for PET 3
! Set number of nodes
numNodes=8
! Allocate and fill the node id array.
allocate(nodeIds(numNodes))
nodeIds=(/5,6,8,9,14,15,17,18/)
! Allocate and fill node coordinate array.
! Since this is a 3D Mesh the size is 2x the
! number of nodes.
allocate(nodeCoords(3*numNodes))
nodeCoords=(/1.0,1.0,1.0, & ! node id 5
2.0,1.0,1.0, & ! node id 6
1.0,2.0,1.0, & ! node id 8
2.0,2.0,1.0, & ! node id 9
1.0,1.0,2.0, & ! node id 14
2.0,1.0,2.0, & ! node id 15
1.0,2.0,2.0, & ! node id 17
2.0,2.0,2.0/) ! node id 18
! Allocate and fill the node owner array.
allocate(nodeOwners(numNodes))
nodeOwners=(/0, & ! node id 5
1, & ! node id 6
2, & ! node id 8
3, & ! node id 9
0, & ! node id 14
1, & ! node id 15
2, & ! node id 17
3/) ! node id 18
! Set the number of each type of element, plus the total number.
numElems=1
! Allocate and fill the element id array.
allocate(elemIds(numElems))
elemIds=(/4/)
! Allocate and fill the element topology type array.
allocate(elemTypes(numElems))
elemTypes=(/ESMF_MESHELEMTYPE_HEX/) ! elem id 1
! Allocate and fill the element connection type array.
! Note that entry are local indices
allocate(elemConn(8*numElems))
elemConn=(/1,2,4,3,5,6,8,7/) ! elem id 1
endif
endif
! Create distgrid to ensure that elements are created on the
! same PET as described above
elemdistgrid=ESMF_DistGridCreate(elemIds, rc=rc)
if (rc /= ESMF_SUCCESS) return
! Read mesh from file that's the same as the one described by info set up above
mesh=ESMF_MeshCreate("data/test_sph_2x2x1_esmf.nc", &
fileformat=ESMF_FILEFORMAT_ESMFMESH, &
elementDistgrid=elemDistgrid, &
rc=rc)
if (rc /= ESMF_SUCCESS) return
! DEBUG OUTPUT
!call ESMF_MeshWrite(mesh,"mesh_3D_EM",rc=rc)
!if (rc .ne. ESMF_SUCCESS) return
! Init correct to true before looking for problems
correct=.true.
! Get dim and coord info
call ESMF_MeshGet(mesh, &
parametricDim=pdim, &
spatialDim=sdim, &
coordSys=coordSys, &
rc=rc)
if (rc /= ESMF_SUCCESS) return
! Check Counts
if (pdim .ne. 3) correct=.false.
if (sdim .ne. 3) correct=.false.
if (coordSys .ne. ESMF_COORDSYS_SPH_DEG) correct=.false.
! Get counts
call ESMF_MeshGet(mesh, &
nodeCount=numNodesTst, &
elementCount=numElemsTst, &
elementConnCount=numElemConnsTst, &
rc=rc)
if (rc /= ESMF_SUCCESS) return
! Check Counts
if (numNodes .ne. numNodesTst) correct=.false.
if (numElems .ne. numElemsTst) correct=.false.
if (numElems*8 .ne. numElemConnsTst) correct=.false.
! Debugging
!write(*,*) "numNodes=",numNodes,numNodesTst
!write(*,*) "numElems=",numElems,numElemsTst
!write(*,*) "numElemConns=",numElemConns,numElemConnsTst
! Get is present information
call ESMF_MeshGet(mesh, &
nodeMaskIsPresent=nodeMaskIsPresentTst, &
elementMaskIsPresent=elemMaskIsPresentTst, &
elementAreaIsPresent=elemAreaIsPresentTst, &
elementCoordsIsPresent=elemCoordsIsPresentTst, &
rc=rc)
if (rc /= ESMF_SUCCESS) return
! Debug
! write(*,*) "nodeMaskIsPresent=",nodeMaskIsPresentTst
! write(*,*) "elemMaskIsPresent=",elemMaskIsPresentTst
! write(*,*) "elemAreaIsPresent=",elemAreaIsPresentTst
! write(*,*) "elemCoordsIsPresent=",elemCoordsIsPresentTst
! Check is present info
if (nodeMaskIsPresentTst) correct=.false.
if (elemMaskIsPresentTst) correct=.false.
if (elemAreaIsPresentTst) correct=.false.
if (elemCoordsIsPresentTst) correct=.false.
! Allocate space for tst arrays
allocate(nodeIdsTst(numNodesTst))
allocate(nodeCoordsTst(3*numNodesTst))
allocate(nodeOwnersTst(numNodesTst))
allocate(elemIdsTst(numElemsTst))
allocate(elemTypesTst(numElemsTst))
allocate(elemConnTst(numElemConnsTst))
! Get Information
call ESMF_MeshGet(mesh, &
nodeIds=nodeIdsTst, &
nodeCoords=nodeCoordsTst, &
nodeOwners=nodeOwnersTst, &
elementIds=elemIdsTst, &
elementTypes=elemTypesTst, &
elementConn=elemConnTst, &
rc=rc)
if (rc /= ESMF_SUCCESS) return
! do i=1,numElemsTst
! write(*,*) localPet,"# ",elemIdsTst(i),"ea=",elemAreaTst(i),"ec=",elemCoordsTst(2*i-1),elemCoordsTst(2*i),"em=",elemMaskTst(i)
! enddo
! Check node ids
do i=1,numNodesTst
if (nodeIds(i) .ne. nodeIdsTst(i)) correct=.false.
enddo
! Check node Coords
k=1
do i=1,numNodesTst ! Loop over nodes
do j=1,3 ! Loop over coord spatial dim
if (nodeCoords(k) .ne. nodeCoordsTst(k)) correct=.false.
k=k+1
enddo
enddo
! Check node Owners
do i=1,numNodesTst
if (nodeOwners(i) .ne. nodeOwnersTst(i)) correct=.false.
enddo
! Debug output
! write(*,*) "nodeMask =",nodeMask
! write(*,*) "nodeMaskTst=",nodeMaskTst
! Check elem ids
do i=1,numElemsTst
if (elemIds(i) .ne. elemIdsTst(i)) correct=.false.
enddo
! Check elem Types
do i=1,numElemsTst
if (elemTypes(i) .ne. elemTypesTst(i)) correct=.false.
enddo
! Check elem Connections
do i=1,numElemConnsTst
if (elemConn(i) .ne. elemConnTst(i)) correct=.false.
enddo
! Debug output
! write(*,*) "elemCoords =",elemCoords
! write(*,*) "elemCoordsTst=",elemCoordsTst
! deallocate node data
deallocate(nodeIds)
deallocate(nodeCoords)
deallocate(nodeOwners)
! deallocate elem data
deallocate(elemIds)
deallocate(elemTypes)
deallocate(elemConn)
! Deallocate tst Arrays
deallocate(nodeIdsTst)
deallocate(nodeCoordsTst)
deallocate(nodeOwnersTst)
deallocate(elemIdsTst)
deallocate(elemTypesTst)
deallocate(elemConnTst)
! Get rid of Mesh
call ESMF_MeshDestroy(mesh, rc=rc)
if (rc /= ESMF_SUCCESS) return
! Get rid of elemDistgrid
call ESMF_DistGridDestroy(elemDistgrid, rc=rc)
if (rc /= ESMF_SUCCESS) return
! Return success
rc=ESMF_SUCCESS
end subroutine check_mesh_from_sph_3D_EM_file